Home
>
Products
>
On-line water quality monitoring equipment
>
Ammonia Nitrogen On-line Water Quality Monitor

ERUN-SZ4-A-E6

Ammonia Nitrogen On-line Water Quality Monitor
For industrial wastewater, domestic wastewater, surface water, etc.
Ammonia Nitrogen On-line Water Quality Monitor
Ammonia Nitrogen On-line Water Quality Monitor
Ammonia Nitrogen On-line Water Quality Monitor
Ammonia Nitrogen On-line Water Quality Monitor
Ammonia Nitrogen On-line Water Quality Monitor
Ammonia Nitrogen On-line Water Quality Monitor
Introduction

Brand:Erun 

 Ammonia Nitrogen On-line Water Quality Monitor

Model:ERUN-SZ4-A-E6

Parameter:Ammonia nitrogen (ion electrode method)

ERUN-SZ4-A-E6 water quality ammonia nitrogen online monitor sensor, with its characteristics of no chemical reagents, realizes the green environmental protection and non-polluting detection method, and is able to uninterrupted real-time online monitoring of ammonia nitrogen content in water quality. The sensor is equipped with ammonium ion electrode, pH electrode and reference electrode as standard, and the user can also choose potassium ion reference electrode according to needs. During the detection process, it can automatically carry out pH and temperature compensation correction to ensure the accuracy of the measurement results. This ammonia nitrogen online water quality monitor is widely used in all kinds of water quality monitoring scenarios, including industrial wastewater, domestic sewage and surface water, etc., which realizes continuous, real-time and reliable monitoring of ammonia nitrogen concentration in water.

Parameters

ERUN-SZ4-A-E6 ammonia nitrogen on-line water quality monitor sensor technical parameters:

Sensor Model

ERUN-E6A

ERUN-E6B

Measurement range

0-100mg/L(Optional 0-1000 mg/L)

accuracy

±10% or ±0.5 mg/L(take the bigger one)

resolution

0.01 mg/L

temperature range

0~50℃

pH realm

4-10pH

protection class

IP68

sensor interface

RS-485,MODBUS protocol

power supply

DC9~24V,Current ≥ 1A

Cable Length

10m (standard), customizable

Self-cleaning system

标配自清洁刷

×

sizes

Φ64mm *271mm

Φ36mm *265mm

calibrations

One or two point calibration

Housing Material

POM

POM+316L (optional titanium)

ERUN-SZ4-A-E6 ammonia nitrogen on-line water quality monitor controller technical parameters:

demonstrate

LED liquid crystal display

Automatic temperature compensation

0~60℃

signal output

0~20mA(Load resistance<750Ω)

4~20mA(Load resistance<750Ω)

Power supply

85~265VAC±10%,50±1Hz,Power ≤3W;

9~36VDC,Power ≤3W

communication output

RS485 Modbus RTU

environmental temperature

-10℃~60℃

relative humidity

Not more than 90%

sizes

144mm*144mm*130mm

Installation

Recessed (Opening size 138*138mm)

weights

0.5kg

Features

ERUN-SZ4-A-E6 Ammonia Nitrogen Online Water Quality Monitor Sensor Functional Features:

Automatically compensates for potassium ions in water (optional), pH electricity and temperature;

Adopts digital sensor RS485 output and supports standard Modbus protocol;

With self-cleaning brushes to prevent bio-adhesion and longer maintenance intervals;

Built-in calibration parameters for easy field use and secondary calibration;

ERUN-SZ4-A-E6 Ammonia Nitrogen On-line Water Quality Monitor Controller Functional Features:

Adopt LED LCD display, intelligent Chinese/English menu operation;

Output signal: software selects 0-20mA or 4-20mA output;

High-resistance preamplifier: high input impedance, anti-noise, strong anti-interference ability;

Multi-parameter display on the same screen: Simultaneously display pH (or ORP) value, temperature value, two current outputs and relay working status;

Self-set password: Users can set or change their own passwords to avoid misuse by uninvolved personnel.
+86 18166600151
yrhb@erunwas.com