Home
>
Products
>
On-line water quality monitoring equipment
>
Online Water Conductivity/TDS/Resistivity Monitor

ERUN-SZ1S-A-A4

Online Water Conductivity/TDS/Resistivity Monitor
Used in environmental protection, sewage treatment, thermal power, breeding, food processing, printing, metallurgy, pharmaceuticals, tap water, etc.
Online Water Conductivity/TDS/Resistivity Monitor
Online Water Conductivity/TDS/Resistivity Monitor
Online Water Conductivity/TDS/Resistivity Monitor
Online Water Conductivity/TDS/Resistivity Monitor
Online Water Conductivity/TDS/Resistivity Monitor
Online Water Conductivity/TDS/Resistivity Monitor
Introduction

Brand:Erun  

Online Water Conductivity/TDS/Resistivity Monitor

Model:ERUN-SZ1S-A-A4

Conductivity, TDS, resistivity (frequency method)

This product is an on-line intelligent conductivity/TDS/resistivity meter independently developed by our company. It adopts high-performance CPU chip and SMT chip technology to complete the measurement of conductivity/TDS/resistivity and temperature, temperature compensation, and automatic conversion of range, with high precision and good repeatability. Widely used in environmental protection, sewage treatment, thermal power, breeding, food processing, printing, metallurgy, pharmaceuticals, fermentation, chemical industry, tap water and other industries water quality conductivity / TDS / resistivity online monitoring.

Parameters

Online water quality conductivity/TDS/resistivity monitor ERUN-SZ1S-A-A4 controller technical parameters:

Gauge Size:

218*183*126mm

Power supply:

AC220V,DC24V

relays:

2 or 4 groups of relays, divided into high and low point alarm control Load AC220V/3A

Analog output:

1-channel or 2-channel 4~20mA (4-wire), maximum load 750Ω

Digital Interface:

1Road or 2 RS485 (ModBus protocol)

Protection Rating:

IP65

Online water quality conductivity/TDS/resistivity monitor sensor technical parameters:

Resistance measurement range:

0.01 electrodes  50~20000kΩ·cm

0.1  electrodes   5~20000kΩ·cm

1.0  electrodes  0.5~20000kΩ·cm

10.0 electrodes   0.05~20000kΩ·cm

(Other ranges on request)

Conductivity measurement range:

0.01  electrodes   0~20.00μS·cm

0.1  electrodes   0~200.0 μS·cm-1

1.0  electrodes  0~2000  μS·cm-1

10.0 electrodes 0~20.00 mS·cm-1

(Other ranges on request)

TDS measurement range:

0.01 electrodes  0~10 ppm

0.1  electrodes   0~100 ppm

1.0  electrodes  0~1000 ppm

10.0 electrodes  0-10000ppm 

(Other ranges on request)

Resolution:

0.01kΩ·cm

Accuracy:

±2.0 %(FS)

Automatic temperature compensation:

0~100℃ temperature complementary NTC 10K, based on 25℃, temperature complementary coefficient can be corrected.

Online water quality conductivity/TDS/resistivity monitor sensor size and installation schematic:

Installation Method Schematic

Sensor Size Schematic

Online water quality conductivity/TDS/resistivity monitor

Online water quality conductivity/TDS/resistivity monitor



Features

Online Water Conductivity/TDS/Resistivity Monitor ERUN-SZ1S-A-A4 Controller Product Features:

Large dot-matrix liquid crystal display, Chinese menu operation.

Factory settings can be restored.

Watchdog function: ensure that the meter will not die.

Automatic/manual temperature compensation function.

Power-down protection > 10 years.

The detection value can be set for incremental compensation.

Multi-parameter simultaneous display: Detection value, temperature, output current, alarm point, etc. are displayed at the same time, intuitive and easy to read.

+86 18166600151
yrhb@erunwas.com